Thermal Transfer Paper For Dark Color Fabric

Thermal Transfer Paper 1.good quality with best price 2.high heat transfer rate 3.use for 100% cotton T-shirt

Thermal Transfer Paper

 

1. Printing     - Apply the transfer paper to a color inkjet printer. Recommend to select "Photo Quality Inkjet Paper" mode in the "Printer Media Type Setting" for satisfactory printing results.

     - Print the image onto the transfer paper, and leave it to dry for about 10 minutes before transferring.

     - Trim off the unprinted blank area, leaving the image a narrow margin of 5 mm.

 

    2. Transferring     - Preheat the heat press machine, and set the recommended transfer temperature to 150-165°C.

     - Peel the support paper from the printed (i.e. imaged) coating which would remain as a film-like material;

     - Place the imaged coating (i.e. film-like material) onto the textile with the printed (image) side facing upwards.

     - Place a sheet of protective paper on the image, with the glossy side of the protective paper facing downwards;     - Transfer for 15-30 seconds and then remove the textile, peel the protective paper after cooled.

 

    3. Washing     - After transferring, it's best not to wash the textile in 24 hours.

     - Wash the textile in 30-40°C water or cold water, with the transferred pattern inside out.

     - Do not wash with strong alkaline detergents, and no bleach. Avoid rubbing the transferred pattern too hard.

     - Do not wring. Line dry in shade recommended.

     - Do not dry-clean.

 

 

 

Thermal Transfer Paper For Dark Color Fabric